"Coppelia"  9 Ton Cutter Lying  Dover

[ Home ] [ Sails and Deck Gear ] [ Cockpit ] [ Layout ] [ Saloon ] [ Galley ] [ Nav Station ] [ Forecabin ] [ Heads ] [ Engine ] [ Specifications ] [ Comments ]

Sails and Deck Gear

The teak deck is laid on marine ply and was renewed in 1990

Masthead cutter rig with varnished hollow spruce spars. Keel stepped mast stripped and re-varnished 2000. Slab reefing main boom, backstay to Oak bumpkin with chain bobstays. Stainless steel standing rigging . Terylene running rigging.

Running backstays to Laurent Giles patent levers.

The removable inner forestay is set up at the stem so she can be sailed as a cutter or as a fractional rig sloop with a smallish jib, or with the inner foresail removed to allow a large headsail to be set as a mast head sloop.

Sails by Sanders: - 

There are four sheet winches, and three halyard winches on the mast 

Anchoring is a 35lb SWMF plough on chain as a bower, a folding fisherman as kedge.

[ Home ] [ Sails and Deck Gear ] [ Cockpit ] [ Layout ] [ Saloon ] [ Galley ] [ Nav Station ] [ Forecabin ] [ Heads ] [ Engine ] [ Specifications ] [ Comments ]
For further details or to arrange to view, please contact Adrian  Espin at: - Astonbury Marine Services 
19 Colne Road, Brightlingsea, Essex, CO7 0DL  Tel: Freephone 0800 068 6190 or 01206  305996 Fax: 01206  307846
     or email to: adrian@astonburymarine.com
THESE SPECIFICATIONS ARE INTENDED AS ILLUSTRATION ONLY AND DO NOT FORM PART OF ANY CONTRACT
The particulars given above are believed to be correct but the Vendor does not make or give and neither the Broker nor any person in its employment has any authority to make or give any representation or warranty in relation to this vessel in respect of which any Purchaser must rely on his own inspection. Web  by AMS